双功能改性的T型分子筛膜用于有机溶剂脱水

将3-氨丙基三乙氧基硅烷（APTES）引入到T型分子筛膜表面,用以修饰多晶膜合成过程中产生的缺陷。X射线衍射、场发射扫描电子显微镜、X射线光电子能谱和FT-IR等方法的表征结果显示,APTES通过“键合”的形式被成功地修饰到膜表面上。APTES层起到2个作用：一是提高膜的亲水性;二是减少膜层的缺陷。将修饰后的膜应用在348 K、90%的异丙醇水溶液的脱水时,该膜表现出比较高的分离因子和通量。该方法重复性良好,5个修饰后的膜样品的选择性平均增加了大约8倍（从359±23增加到2 934±183）,而渗透通量仅仅从（3.52±0.10） kg·m^-2·h^-1降低到（3.06±0.14） kg·m^-2·h^-1（减少13.07%）。在363 K下,修饰的膜经过100 h的连续测试,膜渗透测得的水含量均可达到99.50%以上,表明修饰后的膜性能较稳定。     

Synthetic studies towards(-)-deserpidine:Total synthesis of the stereoisomer and derivative of (-)-deserpidine

The asymmetric synthesis of 16,17,20-epi-deserpidine and a derivative of(-)-deserpidine has been achieved.Key feature s in the assembly of the pentacyclic framework include a visible-light photocatalytic intra-/inter-/intramolecular radical cascade reaction to construct the tetracyclic ABCD ring system in one-pot and an intramolecularaldol reaction to forge the cyclohexane E ring.     

Synthesis of structurally diversified BINOLs and NOBINs via palladium-catalyzed C–H arylation with diazoquinones

Privileged biaryl frameworks, BINOL and NOBIN, were efficiently constructed with sole 1-DNQs as arylation reagents under one set of reaction conditions. The judicious selection of palladium-catalytic system plays a pivotal role in the excellent selectivities. This transformation accommodated fairly broad substrate generality for both 2-naphthol and N-Boc-2-naphthylamine and afforded the structurally diversified BINOLs and NOBIN derivatives in high efficiency. Notably, the bromosubstituents which cannot survive in conventional palladium-catalyzed reactions were well-compatible with this set of conditions, providing an effective handle for further enriching the library of BINOLs and NOBINs. Preliminary attempts on the asymmetric variant of this reaction were also performed with up to 80:20 er for BINOLs synthesis.     

Cross-dehydrogenative Coupling of N-Aryl Tetrahydroisoquinolines Catalyzed by an Anthraquinone-containing Polymeric Photosensitizer

This work reports the photocatalytic application of an anthraquinone-containing polymeric photosensitizer (AQ-PHEMA) in the visible light-induced cross - dehydrogenative-coupling of N-aryl tetrahydroisoquinolines with several nucleophiles, including nitromethane, 1-methyl-2-alkyl ketone and dialkyl (aryl) phosphine oxide. The results revealed that the reaction could be catalyzed by AQ-PHEMA efficiently to afford a series of 1-substituted-2-aryl-1,2,3,4-tetrahydroisoquinolines in good to excellent yields with nice substrate tolerance under aerobic conditions at room temperature. The practical application potential was also showcased by a gram-scale synthesis. More importantly, the utilization of AQ-PHEMA as a heterogeneous photosensitizer also showed nice recyclability and reusability of the catalyst, whereas AQ-PHEMA can be easily separated and reused for at least 8 times without significant loss of photocatalytic activity.     

Isomaltulose Exhibits Prebiotic Activity,and Modulates Gut Microbiota,the Production of Short Chain Fatty Acids,and Secondary Bile Acids in Rats

In vitro experiments have indicated prebiotic activity of isomaltulose, which stimulates the growth of probiotics and the production of short chain fatty acids (SCFAs). However, the absence of in vivo trials undermines these results. This study aims to investigate the effect of isomaltulose on composition and functionality of gut microbiota in rats. Twelve Sprague–Dawley rats were divided into two groups: the IsoMTL group was given free access to water containing 10% isomaltulose (w/w), and the control group was treated with normal water for five weeks. Moreover, 16S rRNA sequencing showed that ingestion of isomaltulose increased the abundances of beneficial microbiota, such as Faecalibacterium and Phascolarctobacterium, and decreased levels of pathogens, including Shuttleworthia. Bacterial functional prediction showed that isomaltulose affected gut microbial functionalities, including secondary bile acid biosynthesis. Targeted metabolomics demonstrated that isomaltulose supplementation enhanced cholic acid concentration, and reduced levels of lithocholic acid, deoxycholic acid, dehydrocholic acid, and hyodeoxycholic acid. Moreover, the concentrations of propionate and butyrate were elevated in the rats administered with isomaltulose. This work suggests that isomaltulose modulates gut microbiota and the production of SCFAs and secondary bile acids in rats, which provides a scientific basis on the use of isomaltulose as a prebiotic.     

Biocomputing Based on DNA Strand Displacement Reactions

The high sequence specificity and precise base complementary pairing principle of DNA provides a rich orthogonal molecular library for molecular programming, making it one of the most promising materials for developing bio-compatible intelligence. In recent years, DNA has been extensively studied and applied in the field of biological computing. Among them, the toehold-mediated strand displacement reaction (SDR) with properties including enzyme free, flexible design and precise control, have been extensively used to construct biological computing circuits. This review provides a systemic overview of SDR design principles and the applications. Strategies for designing DNA-only, enzymes-assisted, other molecules-involved and external stimuli-controlled SDRs are described. The recently realized computing functions and the application of DNA computing in other fields are introduced. Finally, the advantages and challenges of SDR-based computing are discussed.     

Real-time tracking of hydrogen peroxide secreted by live cells using MnO2 nanoparticles intercalated layered doubled hydroxide nanohybrids

We report a facile and green method for the fabrication of new type of electrocatalysts based on MnO₂ nanoparticles incorporated on MgAl LDH P-type semiconductive channel and explore its practical applications as high-performance electrode materials for electrochemical biosensor. A series of MgAl layered doubled hydroxide (LDH) nanohybrids with fixed Mg/Al (M²⁺/M³⁺ atomic ratio of 3) and varied amount of MnCl₂.4H₂O are fabricated by a facile co-precipitation method. This approach demonstrates the combination of distinct properties including excellent intercalation features of LDH for entrapping nanoparticles and high loading of MnO₂ nanoparticles in the host layers of LDH. Among all samples, Mn5–MgAl with 0.04% loaded manganese has a good crystalline morphology. A well-dispersed MnO₂ nanoparticles encapsulated into the host matrix of hydrotalcite exhibit enhanced electrocatalytic activity towards the reduction of H₂O₂ as well as excellent stability, selectivity and reproducibility due to synergistic effect of good catalytic ability of MnO₂ and conductive MgAl LDH. Glass carbon electrode (GCE) modified with Mn5–MgAl possesses a wide linear range of 0.05–78 mM, lowest detection limit 5 μM (S/N = 3) and detection sensitivity of 0.9352 μAmM⁻¹. This outstanding performance enables it to be used for real-time tracking of H₂O₂ secreted by live HeLa cells. This work may provide new insight in clinical diagnosis, on-site environmental analysis and point of care testing devices.     

Colorimetric method for determination of bisphenol A based on aptamer-mediated aggregation of positively charged gold nanoparticles

A sensitive, specific and rapid colorimetric aptasensor for the determination of the plasticizer bisphenol A (BPA) was developed. It is based on the use of gold nanoparticles (AuNPs) that are positively charged due to the modification with cysteamine which is cationic at near-neutral pH values. If aptamers are added to such AuNPs, aggregation occurs due to electrostatic interactions between the negatively-charged aptamers and the positively-charged AuNPs. This results in a color change of the AuNPs from red to blue. If a sample containing BPA is added to the anti-BPA aptamers, the anti-BPA aptamers undergo folding via an induced-fit binding mechanism. This is accompanied by a conformational change, which prevents the aptamer-induced aggregation and color change of AuNPs. The effect was exploited to design a colorimetric assay for BPA. Under optimum conditions, the absorbance ratio of A ₅₂₇/A ₆₈₀ is linearly proportional to the BPA concentration in the range from 35 to 140 ng∙mL⁻¹, with a detection limit of 0.11 ng∙mL⁻¹. The method has been successfully applied to the determination of BPA in spiked tap water and gave recoveries between 91 and 106 %. Data were in full accordance with results obtained from HPLC. This assay is selective, easily performed, and in our perception represents a promising alternative to existing methods for rapid quantification of BPA.

The negatively-charged anti-BPA aptamers can absorb onto the positively-charged cysteamine-capped AuNPs (cysteamine-AuNPs) via electrostatic interactions, which can cause the aggregation of AuNPs accompanied by a red-to-blue color change. In the presence of BPA, the specific binding of BPA to the aptamers induces the conformation changes of anti-BPA aptamers, which can release the aptamers from cysteamine-AuNPs and thus prevent the aggregation and color change of cysteamine-AuNPs.

     

Syntheses,Structures, and Magnetic Properties of Two Cobalt(II) Metal‐Organic Frameworks Based on Y‐shaped 3,5,4′‐Azobenzenetricarboxylic Acid and Different N‐donor Ligands

Two metal‐organic frameworks, [Co₂(ABTC)(bimh)(OH)] · 2H₂O ( 1 ) and [Co₃(ABTC)₂(dimb)₄]_n ( 2 ) [H₃ABTC = 3,4′,5‐azobenzenetricarboxylic acid, bimh = 1,1′‐(1,4‐hexanediy)bis(imidazole), dimb = 1,4‐bis(1H‐imidazol‐1‐yl)benzene], were prepared under solvothermal conditions and structurally characterized. Complex 1 demonstrates a complicated 3D (3,8)‐connected tfz‐d net with (4³)₂(4⁶.6¹⁷.8⁵) topology. The framework of 2 can be classified as a rare 3D (3,6,6)‐connected net with the Schäfli symbol of (4.6²)₂(4².6¹⁰.8³)(4⁴.6¹⁰.8), and exhibits an intriguing self‐penetrating motif. Meanwhile, the thermal stabilities and magnetic properties for 1 and 2 were also probed.     

Syntheses,Structures, and Luminescent Properties of d10 Coordination Polymers with 2‐(4‐Carboxyphenyl)‐imidazo[4, 5‐f]‐1, 10‐phenanthroline and 1, 3‐Benzenedicarboxylate Derivatives

Four Zn^II/Cd^II coordination polymers (CPs) based on 2‐(4‐carboxy‐phenyl)imidazo[4, 5‐f]‐1, 10‐phenanthroline (HNCP) and different derivatives of 5‐R‐1, 3‐benzenedicarboxylate (5‐R‐1, 3‐BDC) (R = NO₂, H, OH), [Zn(HNCP)(5‐NO₂‐1, 3‐BDC)]_n ( 1 ), [Cd(HNCP)(5‐NO₂‐1, 3‐BDC)]_n ( 2 ), [Zn(HNCP)(1, 3‐BDC)(H₂O)₂]_n ( 3 ), and {[Zn(HNCP)(5‐OH‐1, 3‐BDC)(H₂O) · H₂O}_n ( 4 ) were synthesized under hydrothermal conditions. Compounds 1 – 4 were determined by elemental analyses, IR spectroscopy, and single‐crystal and powder X‐ray diffraction. Compounds 1 and 2 are isomorphous, presenting a 4‐connected uninodal (4, 4)‐sql 2D framework with threefold interpenetration, which are further extended into the three‐dimensional (3D) supramolecular architecture through π ··· π stacking interactions between the aryl rings of 5‐NO₂‐1, 3‐BDC. Compared to compound 1 , 3 is obtained by using different reaction temperatures and metal‐ligand ratios, generating a 3D framework with –ABAB– fashion via π ··· π stacking interactions. Compound 4 is a 1D chain, which is further extended into a 3D supramolecular net by hydrogen bonds and π ··· π stacking interactions. The thermogravimetric and fluorescence properties of 1 – 4 were also explored.